20 Liter Kanister befüllt mit dem Schneidöl - Hochleistungsschneidöl

High-Performance Cutting Oil

Art.-Nr : C02004

The medium-viscosity, water-washable High-Performance Cutting Oil is used in cutting- and machining processes, for the non-aggressive drilling, cutting, punching and milling of steel, casting materials, aluminium or non-ferrous metals. The Cutting Oil features an efficient cooling- and lubricating effect, which improves the finish quality of the work pieces and extends tool/mould service lives. Sprayed from the aerosol can as cutting gel (Cool Cut Gel), it optimally adheres to the parts.

For all kinds of steels and casting materials, aluminium and non-ferrous metal alloys
Extended tool/mould service lives
Universally applicable in simple to sophisticated metalworking operations
Also available as Cool Cut Gel in an aerosol can

Do you have any questions concerning this product?

Product Details

In machining processes, High-Performance Cutting Oil protects the tools used and the metal-...more

Close menu

High-Performance Cutting Oil

In machining processes, High-Performance Cutting Oil protects the tools used and the metal- and plastic surfaces from premature wear and tear. In processes such as cutting or drilling, the surface material tends to form layers on the tools. The heat released by the metals touching each other may cause these deposits to solidify. These so-called built-up edges are prevented by using the extremely stable High-Performance Cutting Oil because it cools and lubricates. This way, tool wear and tear is countered and i.a. material processing inaccuracies or the breaking-off of tool parts are reduced.

The odourless High-Performance Cutting Oil is based on high-purity paraffinic white oils that provide corrosion protection for the parts.

After machining though, the oil is easy to wash off with warm water, which also facilitates use in food-related areas. The oil is of medium viscosity and keeps its consistency even at temperatures of -30°C/ -22°F. This means that it can also be used on cooled surfaces.

Density at 15°C/59°F	0.89 g/ml
Viscosity at 40°C/104°F	35 mm2/s
Flash point	>100°C/212°F
Pour point	−30°C/-22°F

For an enhanced lubricating effect, Cool Cut Gel can be used, because the cutting gel features a higher viscosity than the cutting oil, which prevents the formation of air bubbles.

On the basis of high-purity paraffinic white oils
The oil film can also be rinsed off with warm water
Prevents corrosion
Ready for use

Technical specification

EAN:	4024048601407
Label:	Labelled
VOC content:	VOC-free
Material:	aluminium, Castings, Iron, non-ferrous metals
Concentrate:	ready to use
Seal of approval:	Ready-To-Use, VOC free!
Safety advice:	Aquatic Chronic 3