E-NOX-I
Art.-Nr : A00192Viscous, acidic stainless steel cleaner with abrasive ingredients
Ultra-strong water-based cleaner for removing extremely persistent contaminations from stainless steel and other surfaces. Cleans tarnished, heavily weathered and corroded surfaces. Removes mineral sediments, such as limescale and cement, incrustations, extraneous rust, and oxidations.
- Contains neither nitric- nor hydrofluoric acid
- Highly active, non-destructive cleaning effect
- Can be rinsed off without residues, can be used in the food industry (Art. 31 LFGB)
Product Details
E-NOX-I is a water-based, viscous, acidic cleaner that can be used on extremely persistent contaminations of stainless steel. Ultra-fine abrasive materials guarantee thorough cleaning without visibly damaging the surface. Its viscosity facilitates good adherence to the surface, which supports exposure time. It cleans tarnished, heavily weathered and corroded surfaces, and removes mineral sediments, such as limescale and cement, incrustations, extraneous rust, and oxidations. The original look of the surface will be restored; the protective passivation layer of the stainless steel can form again. The result is shining surfaces of good visual quality.
A select combination of bio-degradable surfactants, strong mineral acid, and an abrasive ingredient guarantees its excellent cleaning performance. In addition to stainless steel cleaning, it can also be used on aluminium, copper, enamel, synthetics, acid-resistant clinker bricks, and other acid-resistant surfaces. As E-NOX-I is free from toxic hydrofluoric acid, nitric- and hydrochloric acid, no special occupational health and safety measures for employee protection are required. The cleaner is non-flammable and contains no solvents.
We recommend using it with the special cleaning fleece. Apply E-NOX-I and spread it using a damp cloth or, for higher effectiveness, the special cleaning fleece. Exposure time depends on the type and degree of contamination. Work intensively on extremely persistent contaminations with the special cleaning fleece. Afterwards rinse with water or clean with diluted UNO or FT 100.
The advantages:
- Non-flammable and solvent-free
- Water-based
- Contains neither nitric- nor hydrofluoric acid
- High yield
- Highly active cleaning effect
- Non-destructive
- Can be rinsed off without residues, can be used in the food industry (Art. 31 LFGB)
- Removes mineral sediments, such as limescale, cement, and incrustations
- The original look will be restored
- Ultra-fine abrasive materials guarantee thorough cleaning without visibly damaging the surface
- Also cleans aluminium, copper, enamel, synthetics, acid-resistant clinker bricks, and other acid-resistant surfaces
- Optimal application in combination with the special cleaning fleece
Related links to "E-NOX-I"
Seals of approval
- the cleaner is ready-to-use
- Reduced volatile organic compounds
Technical specification
| Label: | Minor label |
| VOC content: | VOC-reduced |
| NSF-certified: | no |
| Contamination: | limescale, mineral deposits, rust, oxidation, tarnishing |
| Material: | aluminium, stainless steel, steel, tiles |
| Check material compatibility: | non-ferrous metal, rubber, zinc-coated surfaces |
| Cleaner basis: | water-based acidic |
| Mechanics: | manual cleaning |
| Manual/automatic: | manual |
| Concentrate: | ready to use |
| Seal of approval: | Ready-To-Use, VOC reduced! |
| Safety advice: | Eye Irrit. 2, Met. Corr. 1, Skin Irrit. 2 |
Field of application
- Universally applicable in the industry and craft sector
- For indoors and outdoors
- For ultra-strong cleaning of stainless steel and other surfaces
Other Recommendations
Viewed
-
-
Low application temperature, energy-saving, water-saving
-
For us, sustainability means taking responsibility
-
-
From renewable raw materials, non-flammable, VOC-free, non-marking
-
-
Suitable for the food industry, miscible with water, can be rinsed without residue
-
-
Free from / reduced volatile organic compounds according to EU regulation