Additive Cleaner 100
Art.-Nr : A500914Residue-free maintenance for 3D printers
Additive Cleaner 100 is the ideal solution for residue-free surface cleaning of 3D printers. It effectively removes fingerprints, dust, oil, grease, and even uncured UV resin.
Manual application is simple, gentle on the material and suitable for all standard 3D printing surfaces.
✅ REMOVES adhesives and release agents, fingerprints, dust, grease and oils effectively
✅ CLEANS all standard surfaces in 3D printing
✅ Environmentally friendly and safe – label-free, VOC-reduced
✅ Material-friendly
✅ Improved print quality in the FFF process
✅ Increases the service life of 3D printers
Product Details
The alternative to solvents for effortless and residue-free 3D printer maintenance.
The manual application makes the Additive Cleaner 100 the optimal choice for effortless maintenance of 3D printers. This innovative solution extends the service life of your printers and maximises the quality of 3D-printed objects.
VERSATILE.
- Removes light soiling such as adhesives and release agents, fingerprints, dust, and minor soiling caused by oil and grease.
- Removes metal and plastic powder as well as contamination from uncured UV resin.
GENTLE.
- Material-friendly and suitable for all common 3D printer surfaces.
- Residue-free cleaning, VOC-reduced and label-free.
EFFICIENT.
- The cleaner is ready to use and can be applied immediately.
- Can increase the adhesion of components to the print bed in the FFF process.
Related links to "Additive Cleaner 100"
Seals of approval
- the cleaner is ready-to-use
- unlabelled according to CLP-regulations
- Reduced volatile organic compounds
Technical specification
EAN: | 4024048805621 |
Type of contamination: | Dust, abrasion particles, Oil, grease |
Label: | label-free |
VOC content: | VOC-reduced |
Contamination: | Dust, fingerprints, light residues, Oil, grease, dirt, synthetic oils and greases, oil, separating agents |
Material: | Glas, Metal, PEI-coated plates |
Mechanics: | manual cleaning |
Manual/automatic: | manual |
Concentrate: | ready to use |
Seal of approval: | Ready-To-Use, unlabelled, VOC reduced! |
Field of application
The manual cleaner is used in 3D printing to clean slightly contaminated surfaces. It can also increase the adhesion of components to the print bed in the FDM process.
Usage
The cleaner is ready to use and is wiped off with a clean cloth after spraying on.
Please note that it must not be sprayed onto hot surfaces. Allow the parts or surfaces to cool down before use to achieve optimum results.
Other Recommendations
Viewed
-
Low application temperature, energy-saving, water-saving
-
For us, sustainability means taking responsibility
-
From renewable raw materials, non-flammable, VOC-free, non-marking
-
Suitable for the food industry, miscible with water, can be rinsed without residue
-
Free from / reduced volatile organic compounds according to EU regulation