Die-Casting Mould Cleaner
Art.-Nr : E02017For regular intermediate cleaning of aluminium die-casting moulds and other non-ferrous metal die-casting processes.
- Non-flammable
- Excellent cleaning efficiency
- Good compatibility with commercial releasing agents
Product Details
The Die-Casting Mould Cleaner serves for the removal of aluminium- and releasing agent residues from die-casting moulds. The product stands out for its high yield and associated low consumption. Staff exposure to fumes will be minimized. Regular application of the ready-to-use product in intermediate cleaning will shorten the final cleaning process, which will in turn reduce downtimes and increase productivity and product quality. Der Die-Casting Mould Cleaner simultaneously preserves the moulds and is compatible with commercial releasing agents.
- Non-flammable
- Excellent cleaning efficiency
- Good compatibility with commercial releasing agents
- Very economical – low consumption
- Staff exposure to fumes will be reduced
- Optimal intermediate cleaning with simultaneous preservation of moulds
Related links to "Die-Casting Mould Cleaner"
Seals of approval
- Reduced volatile organic compounds
Technical specification
| Label: | Labelled |
| Contamination: | Bitumen, heavy greases, crude oil, carbonized organic contaminations, Dust, fingerprints, light residues, Oil, grease, dirt, synthetic oils and greases, wax |
| Material: | aluminium, Castings, Iron, non-ferrous metals, Steel/stainless steel, Varnished surfaces, zinc-coated surfaces |
| Mechanics: | immersion bath, manual cleaning, manual cleaning on vertical surfaces |
| Seal of approval: | VOC reduced! |
| Safety advice: | Asp. Tox. 1 |
Field of application
- For aluminium die-casting foundries
- For the removal of releasing agent residues
- Intermediate cleaning of aluminium die-casting moulds
Usage
Depending on the degree of contamination, apply the Die-Casting Mould Cleaner to the mould using a hard brush or a cotton cloth. For good cleaning performance, the mould should have a slight residual heat of 90°C/194°F max. After application blow the mould out with compressed air.
Other Recommendations
Viewed
-
-
Low application temperature, energy-saving, water-saving
-
For us, sustainability means taking responsibility
-
-
From renewable raw materials, non-flammable, VOC-free, non-marking
-
-
Suitable for the food industry, miscible with water, can be rinsed without residue
-
-
Free from / reduced volatile organic compounds according to EU regulation